All articles
List & Data Sources

Use LinkedIn list sources safely

LinkedIn activity can help you build timely lists from profile visits, followers, events, posts, engagement, or prepared LinkedIn URLs. Use the source that matches the specific signal, then qualify the people before you treat them as outreach candidates.

A like, comment, follow, or event registration is context—not proof of buying intent. Protect the connected account, keep the first run small, and confirm company and persona fit before any message is prepared.

Before you start

  • Confirm that the required LinkedIn account is connected under the user settings shown in your workspace.
  • Make sure the account owner has approved the use case and that you have the necessary workspace permissions.
  • Use the exact profile, company-page, post, event, or search URL requested by the source.
  • Define the target company and persona before collecting engagement data.
  • Set a small initial lead limit and prepare exclusions for employees, customers, competitors, opt-outs, and other protected contacts.

Choose the source that matches the signal

Starting signalSuitable source where availableCheck first
People who interacted with a postThe LinkedIn post or engagement source that matches the specific post URL.The URL is supported, the post is accessible, and the engagement is relevant to your audience.
Visitors or activity connected to a profileThe relevant profile-activity or profile-visitor source.The correct LinkedIn account is connected and permitted for the workflow.
New followers or company-page activityThe matching company-page follower or activity source.You have access to the page or public activity required by the current flow.
People associated with a LinkedIn eventThe specific event-attendee source.Use the exact event URL and confirm that the event data is available.
People discussing a defined topicThe relevant topic or post-discovery source.The topic is precise enough to avoid unrelated results.
A prepared set of LinkedIn URLsThe upload or LinkedIn-URL source shown in your workspace.The URLs are current, necessary, and appropriate to process.
A lead search or lead list you built in Sales NavigatorImport from Linkedin Sales Navigator (see the section below).A connected user has Sales Navigator, and the URL is a people search or a people lead list.

Source names and availability can vary. Sales Navigator or other account-dependent imports may be unavailable or disabled in some workspaces, so rely on the current UI and do not promise an unsupported flow.

Signalist The verified LinkedIn activity source-selection view with the relevant profile, follower, event, post, engagement, and URL-based options visible.

Import from LinkedIn Sales Navigator

The Import from Linkedin Sales Navigator source reads people from a Sales Navigator URL that you paste into the Sales Navigator URL field. It accepts only two kinds of URL, because only these list people:

URL kindWhat it looks likeHow to copy it
A people search (lead search)Starts with linkedin.com/sales/search/peopleIn Sales Navigator, open a lead search, set your filters, and copy the full address from the browser's address bar.
A people lead listStarts with linkedin.com/sales/lists/people/ followed by the list's numberIn Sales Navigator, open the lead list you saved and copy the full address from the browser's address bar.

Any other URL is refused beside the field, and the message names what you pasted:

What you pastedWhat the field says
A Sales Navigator account list"This is a Sales Navigator account list. Paste a lead search or a lead list URL."
A Sales Navigator company search"This is a Sales Navigator company search. Paste a lead search or a lead list URL."
A LinkedIn profile"This is a LinkedIn profile. Paste a lead search or a lead list URL here, or add the person from the People tile, which takes profile URLs."
Text that is not a Sales Navigator URL"This is not a Sales Navigator lead search or lead list URL. Paste a URL that starts with linkedin.com/sales/search/people or linkedin.com/sales/lists/people."

Nothing is saved until the URL is accepted, so you can correct it and try again. To work from companies, copy the people search or the people lead list instead of the account list or company search.

If the URL has the right shape but LinkedIn still refuses to run it, the Preview and the list show: "LinkedIn refused this search. Check that the Sales Navigator URL still opens in your account, then try again." Open the URL in your own Sales Navigator account. If it no longer opens there (the search or list was deleted, changed, or is not shared with you), copy a fresh URL and paste it again.

Prioritise relevance over reach

Do not send every engagement result directly to outreach. First ask whether the company fits your target market, whether the person has a relevant role, and whether the activity creates a reasonable reason to engage.

  • Apply company and persona scoring where available.
  • Use DQ and exclusion criteria for known non-targets.
  • Limit the first collection so a person can review it.
  • Read the original activity for context; do not infer needs the person did not state.
  • Choose an appropriate next action: monitor, review manually, prepare a message, or exclude.

Signalist A verified LinkedIn source configuration with its URL field, lead limit, and prerequisite or connection indicator visible.

Steps

  1. **Check the connected account. **Open the relevant user settings and confirm that the LinkedIn connection needed for the source is active. Do not use another person’s credentials.
  2. **Open the LinkedIn activity sources. **In Create new list, choose the source that corresponds to your actual signal rather than the source with the broadest reach.
  3. **Provide the requested URL or criteria. **Paste the exact supported profile, event, post, company-page, or search URL when the flow asks for it. Remove tracking parameters.
  4. **Define a realistic first limit. **Use a test size that you can inspect manually and that avoids unnecessary processing or credit use.
  5. **Add scoring and exclusions. **Apply company fit, persona fit, DQ criteria, and blacklists so obvious non-targets do not proceed.
  6. **Run and review the source. **Inspect a sample in the list or feed and compare each person with the original LinkedIn context.
  7. **Choose the next action deliberately. **Only prepare outreach where the signal, company, persona, ownership, and contact permissions support it.

Signalist The verified review view showing a small sample with signal context, company fit, persona fit, priority, and exclusion information where available.

Safety checks before outreach

  • The connected LinkedIn account belongs to the authorised user and workspace.
  • The URL and activity type match the intended source.
  • The lead limit is small enough for manual review.
  • Company fit, persona fit, exclusions, and existing-list status were checked.
  • The planned message does not claim that engagement proves interest or intent.
  • Sender limits and LinkedIn outreach safeguards will be reviewed separately before activation.

Signalist The verified final review or assignment stage before LinkedIn-derived leads enter outreach.

Troubleshooting

ProblemSolution
The source returns no new leadsCheck the connected account, permissions, URL type, time window, refresh behaviour, and whether the people already exist in the list, another list, or a blacklist.
The list shows "LinkedIn post search is unavailable at our data provider; we retry automatically, nothing to do on your side"LinkedIn post search is down at our data provider. Signalist retries automatically and the list finds posts again once the provider answers. You do not need to do anything: do not re-run, recreate or edit the list because of this message. You will not get an email asking you to check the list for this reason. Even if the outage lasts longer, the list does not enter an error state. Signalist keeps trying again every 6 hours until the provider answers.
The source returns too many irrelevant peopleNarrow the source, reduce the limit, strengthen company and persona scoring, add exclusions, and review a new sample.
A LinkedIn URL is rejectedConfirm that you copied the complete supported profile, post, event, or company-page URL without tracking parameters. If the current UI still rejects it, do not substitute another URL type.
The Sales Navigator URL field says the URL is an account list, a company search, a profile, or not a Sales Navigator URLPaste a Sales Navigator people search (linkedin.com/sales/search/people) or a people lead list (linkedin.com/sales/lists/people/…) instead. See "Import from LinkedIn Sales Navigator" above for the exact messages.
The Sales Navigator preview or list says "LinkedIn refused this search. Check that the Sales Navigator URL still opens in your account, then try again."The URL has the right shape, but LinkedIn would not run the search. Open the URL in your Sales Navigator account; if it no longer opens, copy a fresh search or list URL and replace the old one.
The expected source is missing or disabledAvailability can depend on the workspace, plan, account, and permissions. Ask a workspace administrator rather than assuming the source is enabled.
A result is relevant to the post but not to your offerTreat engagement as context, not buying intent. Apply company fit, persona fit, exclusions, and a manual review before outreach.

Frequently asked questions

Does a LinkedIn like or comment mean the person is interested in our product?

No. It only shows activity in a specific context. Validate the company, persona, signal, and original post before deciding whether any outreach is appropriate.

Do I need a connected LinkedIn account?

Some LinkedIn-based sources require a connected account and appropriate permissions. Follow the prerequisite displayed in your workspace.

Why is a LinkedIn source unavailable?

Availability can depend on workspace configuration, plan, account type, permissions, and current product support. Ask a workspace administrator if the source is missing or disabled.

How large should my first lead limit be?

Choose a small test size that your team can review manually. Increase it only after the sample is relevant and the source behaves as expected.

Can I use a Sales Navigator import?

Use it only if the current source is enabled for your workspace and account. Do not assume it is available; follow the UI shown to your user. The source takes a Sales Navigator people search or a people lead list; an account list, a company search or a profile URL is refused beside the URL field.

What should I check before sending to people from a LinkedIn source?

Review relevance, existing relationships, other lists, opt-outs, blacklists, signal context, sender ownership, and the safety limits for your LinkedIn outreach.

Why does my LinkedIn post list say the search is unavailable at our data provider?

LinkedIn post search is not answering at our data provider, so the list cannot look for new posts right now. Signalist retries automatically and the list resumes by itself once the provider answers. You do not need to re-run, recreate or edit the list, and you will not get an email asking you to check it for this reason. Even if the outage lasts longer, the list does not enter an error state. Signalist keeps trying again every 6 hours until the provider answers.